LDM Dust Collector
- Company Name:Tianjin Sino International Trading Co., Ltd.
- Membership:Free Member
- Member Since:2017. 08.08
- Country/Region:China
- City:Tianjin
- Contact:Jane
- Related Keywords:Dust Collector, Baghouse, Industrial Filter, Bag Filter
Contact us
Tianjin Sino International Trading Co., Ltd.
[China]
Introduction of LDM Dust Collector
LDM type offline long bag pulse filter combines chamber blow and pulse blowing ash removal technology, the advantages of the automatic control of ash removal mechanism, give full play to the strong blowing compressed air soot cleaning effect. It 's a kind of big processing air volume, good ash removal effect, high dust removal efficiency, reliable operation, easy maintenance, large dust removal equipment cover an small area. It can be used as dusty gases, such as power plant, steel, non-ferrous metal smelting plant, building materials, incinerator, etc.
Structure of LDM Dust Collector
(1) the advanced lift valve with thin plate type, offline three ash removal mechanism, advanced technology, stable work, soot cleaning thoroughly.
(2) the reasonable design of inlet air flow and diversion technology of ash hopper solves the general phenomenon of each room airflow uneven by bag dust collector effected.
(3) special large reserves of gas storage bag of pulse valve can meet the use of high pressure type (G) of gas source , also the low pressure (D) gas source.
(4) snap ring of the filter bag is good seal performance, easy and quick to replace the bag when repairing, change bag outside the device.
(5) The electromagnetic pulse valve is imported parts, the service life of the vulnerability of diaphragm is more than 1 million time.
(6) The dust control can be used advanced program controller, three modes of differential pressure, timing, manual control , achieve the comprehensive control system to the off-line valve, pulse valve, discharge valve, also can do the secondary alarm control to the sensor components such as temperature, material level control, etc if there is demand.
Working principle
Dust Collector is mainly composed of upper box, middle box, ash hopper, inlet air both flow tubes, stents, filter bag and injection device, discharge device, etc. The dust air put into all the ash hoppers from inlet air both flow tubes of the bag filter ,the big dust is separated by the guide device of ash hopper, then the dust fall into the ash hopper, the small dust flow into the middle box and absorb on the outer surface of the filter bag, the clean air flow into the upper box through the filter bag, and exhaust into the atmosphere by every offline valve and exhaust pipes. While the filter working being, the dust on the filter bag is more and more, when the resistance is up to the limitation value of resistance (usually 1500 pa ), the ash removal device automatically close the offline valve in the first box by the setting value of pressure difference or deashing time, open the electric pulse valve, to stop the wind blowing, use the compressed air to inject the filter bag, make the pressure increase, to shake off the dust on the filter bag into the hopper, discharge by ash discharge device.
Features of LDM Dust Collector
· Long filter bag design, could reduce the steel consumption, reduce the floor area.
· High adaptation, can adopt to large fluctuation range of the dusty gas. Non-standard design can be provided according to the customers' requirements.
· Full steel structure design, convenient transportation and installation of equipment, and ensure the accuracy of the equipment.
· Adopt the advanced programmable control system (PLC).
Application Fields
1. The fume and smoke treatment and particle removing system in metallurgy plant, alloy plant, steel works, fire-retardant factories and power stations.
2. Fume filtration, tiny particle recycle and division of liquid and solid in aluminum electrolytic analysis, tin, zinc, cooper and other rare metals.
3. Smoke filtration in garbage burning, coal-feed boiler and liquidized laid boilers.
4. Division of liquid, solid and tiny particle recycle in chemicals, coke, carbon, dyestuff, pharmacy and plastics.
5. Asphalt concrete mixture, cements, ceramics, building materials, lime and plaster.
6. Dust treatment, purification and collection in electronics, mining, foodstuff processing, flour and timber processing.
Other products from this supplier
Related products from premium suppliers on EC21
Browse: Manufacturer Directory Countries China India Korea Premium Suppliers Community Site Map
About EC21 Contact Us Terms & Conditions Report Item Online Trading Risks Product Listing Policy
中文 繁體 한국어 日本語 Español Русский Français Deutsch
Copyright (c)1997-2024 EC21 Inc. All Rights Reserved. EC21 in KoreanChinese
Business Registry Number: 120-86-03931